STōK Garage Electric Guitar DIY

by Rodney Bowman

STōK is here for your next great idea, and we’re here to help you along the way. The Electric Guitar DIY series is designed to teach you the basics of building an electric guitar. Starting with body design, we will cover wood selection and body shape, moving on to pickups, neck shaping, fretting, wiring, finishing and finally, sound setup.

Electric DIY - Introduction

What you need to complete the entire Electric DIY series

Don’t have some of the items on the list, experiment with alternatives and have fun.

General Tools

– clamps — lots o’ clamps
– router and router table with appropriate bits
– drill press and/or electric drill with guide
– band saw or jigsaw
– hammer
– sandpaper, spindle sander or hand sander
– files and rasps
– tape measure
– soldering iron
– screwdrivers

Specialty Tools

– fretting tools (hammer, fret press, fret lever, fret files)
– radius cauls
– polishing wheel
– string gauge
– radius gauge
– fret rocker

Parts & Materials List

– wood for body (ash)
– wood for neck (walnut)
– pre-radius end fretboard (12-degree radius)
– truss rod
– double humbucker pickups
– volume and tone potentiometers
– 3-way switch
– input jack
– fret wire
– top-loading bridge
– TUSQ nut
– neck plate
– tuning machines (aka tuners)
– string trees
– control cavity cover
– strap buttons
– electronic wire
– guitar strings

rodney

About Rodney Bowman

Born south of Chicago, Rodney Bowman of Bowman Built Guitars was introduced to woodworking by his father straight out of the cradle. At his father’s side, he discovered his passion for wood — the grain, the smells, the colors and textures. Having a passionate desire to create, Rodney naturally decided to pair it with his love for guitars and music, where his creativity will sing long after he’s gone.